 |
Thanks for purchasing our security alarm system. We are pleased to provide this simple tutorial for teaching you how to update the firmware for our home alarm system.
Download the guide: http://suppo... |
|
|
Dear Techsupport, We have an issue at one of our clients. They have connected 5 PIR sensors throughout the house and received 4 x false alarm in 2 weeks time. We have checked the... |
|
|
I have a few questions regarding gsm 800 alarm system and wireless keypad: 1. Can I connect 220 V AC power to the transformer in the metal case? I live in USA. The transformer does no... |
|
|
Two more question regarding smart door sensor and the G70-F.
1. Can this alarm central program the smart sensor into a "smart zone"... How?
I thought the central would not arm, if one ... |
|
|
Good day,We have bought some of your GSM/PSTN alarm systems and have installed them in client locations. We have a radio based alarm system and receiver station in our monitoring station. Is it possib... |
|
|
I wrote to you is because the programming of these sensors fails or not work absolutely. On the case of wireless water leak sensors and on the datasheet of VS-WH500 is clearly wrote that the cod... |
|
|
We are testing now YH800 motion sensor. We have 2 false detection pera day. Why is it appeared?
--------------------------------------------------------------------------------------------------... |
|
|
Is it possible to change the RF code of the VS-PWMC so that I am able to use multiple devices on the one alarm zone? Or is it limited to one device for each zone? Other magnetic contacts I ... |
|
|
1-How reset factory default alarm?2- When I want to activate the alarm, with the button away, the alarm beeps as the next DI DI DI DI DI DI DI DI DI DI (x10) and activate the alarm does not stop... |
|
|
I have bought a Miguard SPS 260 Wireless siren hoping it will work with my new G60 Ultimate, but I am having trouble pairing the two items. It has a learn button on the siren. It beeps once... |
|
|
I'm testing now the sample kit of G60 alarm system from Unifore. Have few short tehnical questions:Cannot program additional 433mhz fix code (PT2262)sensors (PIR, smoke detectors, keyfobs) to G60. Tha... |
|
|
Hello,I am trying to understand how the thermostat function works on this Alarm system. How does the alarm system communicate with the furnace? I do not see any hardwire connec... |
|
|
Hi! Most of our clients have bought our G60-Pro or G60-Pro and VS-DVR. In fact, the difference between G60-Ultimate and G60-Ultimate is that the G60-Pro includes one wireless audio&video PIR camer... |
|
|
> I was instructed by Swallow to email you regarding my Unifore G-60 > Ultimate Alarm Panel that is no longer working correctly. > > I purchased it on December 29, 2014. It has been workin... |
|
|
I got a VS-WJP1 keyboard and install the batteries, the keyboard does not react. I put new batteries and does not react, it is impossible to program the keyboard on the alarm panel G60 Ultimate. The k... |
|
|
As you know, we bought alarm system as a sample (See invoiced attached), and we on Marketing and Feasibility Study, now we faced a problem connecting Wired Beam Fence (VS-R0240-L) to Alarm System , al... |
|
|
Hi Peter, I want to connect the VS-YSGJH-A siren to the G60 alarmpanel, i have read the article on your website but did not succeed: On the siren side i have the following connections: Power + and P... |
|
|
I have a few questions: The Diamond Alarm is not boosting the signal. I have 2 Diamonds 1 meter next to each other with a line of side. 1 i have programmed, but the other is not repeating the first on... |
|
|
Dear Peter, Hope all is well. We have just received our new order with the new wired outdoor siren included. This is the first time we bought a hard wired siren. Could you give us some tips how to ... |
|
|
hi all, I have a question related to G60 Ultimate feature. we will install wired sensors in G60 Ultimate and we will have some situations happen as below: 1. You battery does not supply enough power ... |
|
|
Hi, For the G60-ultimate alarm system, when the alarm is armed using the IOS application (by SMS code), entry delay is no available, the alarm start when the door is opened.When the alarm is armed usi... |
|
|
Hi, I hold on to program allarm and want to know which zones numbers can I program the sirenHi there, The siren doesn't need to program into zones. Quite the contrary, you need to program the alarm p... |
|
|
Good morning, I wish to replace my existing pool alarm IR Beams. I use 4 pairs of beams, 1 high and 1 low on each column, protecting 2 sides of the pool (only two needed). I also saw your multi bea... |
|
|
Dear Reader, Conerning Wireless solar 4 beams fence sensor Model: VS-T10 Has the solar beam two or only one indicator per beam ? Do you have a more detailed description ? What does it mean ? Short pr... |
|
|
I have test 2 outdoorsiren to connect with a g60 alarm system but connected not what can i doHi there, Thanks for your feedback. The programming method is here: https://www.youtube.com/watch?v=WaPW5... |
|
|
my G70 ultimate system is not sensitive enough. it is not detecting wireless sensors in the next room. worked only few days. need some help.Hello dharmasiri kothalawala, The wireless transmission ran... |
|
|
Thanks for ordering our G60 wireless alarm system, the alarm system now has been stopped production. We no longer provide update for the app, if you wish to download the app for Android smartphone, pl... |
|
Loading knowledgebase suggestions...
